08TMC-4U - Multi-Axes Stepper Motor Driver / Controller

Axis ports: X, Y, Z and AUX. Power Requirement: 100~240 V/50~60Hz Pulse Repetition Rate: 1~6M pulse/sec Duty Cycle: 167µm Computer Interface: USB1.0 Motor Drive Channel: 6-pin 2-Phase Unipolar stepper motor

Model: 08TMC-4U
Size: 305 x 142.5 x 340 (W x H x L mm)
Weight: 7.88 (kgs)

Controller
1.S-curve and Trapezoidal-curve velocity profiling motion.
2.Circular coordinated motion supported at both X-Port and Y-Port.
3.Arc coordinated motion supported at both X-Port and Y-Port.
4. limit swich: 2 /Axis (motorized translation stage, 1/ Axis (motorized Rotation stage)

Driving Capability
1.Working current: Manufacturer preset to 1.4 Amp/phase
(Maximum of 4 Amp/phase upgradable upon request)
2.Resolution: Manufacture preset to 8000 microstep/revolution
(Maximum of 20000 microsteps per revolution upgradable upon request) Limit Switch: 2/Axis Close-Loop Feedback

Control with Encoder:
1.Input Signal: ABZ-phase square-wave
2.Maximum Response Time: 4M count/sec
Dimension: 133mm x 142mm x 304mm Weight: 6.5 Kgs